Product Description
Part: Brand new 1993-1994-1995-1996-1997 Pontiac Trans Am-Firebird-Formula Front Bumper-Nose Emblem-Badge
Material: Original Vinyl
Fitment:
1993 Pontiac Firebird Front Bumper-Nose Emblem-Badge
1993 Pontiac Formula Front Bumper-Nose Emblem-Badge
1993 Pontiac Trans Am Front Bumper-Nose Emblem-Badge
1994 Pontiac Firebird Front Bumper-Nose Emblem-Badge
1994 Pontiac Formula Front Bumper-Nose Emblem-Badge
1994 Pontiac Trans Am Front Bumper-Nose Emblem-Badge
1995 Pontiac Firebird Front Bumper-Nose Emblem-Badge
1995 Pontiac Formula Front Bumper-Nose Emblem-Badge
1995 Pontiac Trans Am Front Bumper-Nose Emblem-Badge
1996 Pontiac Firebird Front Bumper-Nose Emblem-Badge
1996 Pontiac Formula Front Bumper-Nose Emblem-Badge
1996 Pontiac Trans Am Front Bumper-Nose Emblem-Badge
1997 Pontiac Firebird Front Bumper-Nose Emblem-Badge
1997 Pontiac Formula Front Bumper-Nose Emblem-Badge
1997 Pontiac Trans Am Front Bumper-Nose Emblem-Badge
Description: This emblem replaces the existing original that is damaged or faded. This is NOT a cheap overlay but the real emblem/badge. Service replacement emblem-badge for 1993-1994-1995-1996-1997 model years Pontiac Firebird-Trans Am-Formula
Correct part to replace the damaged or faded original. Adhesive on the reverse, emblem is ready to install. Requires nothing but installation on the front bumper.
Installation instructions video link: 1993-1997 Pontiac Firebird front bumper cover emblem installation - YouTube
Using automotive grade masking tape or similar, frame the existing emblem area where this replacement badge is going to be installed.
Remove damaged or faded original by liberally spraying it with diluted dish washing soap solution. Then use dental floss to gently lift and remove the old badge. Spraying the lifted edge with the soap solution while using the floss speeds up removal. Once removed rinse area with clean water and dry. Make sure no old emblem adhesive residue remains on the bumper.
Lightly mist the area of application with diluted soap solution. Carefully remove back liner from the new emblem ensuring the emblem remains on the clear film side. Gently position the emblem where you want it to install. You can move the emblem to where you want it if the area is has soap solution mist. Once satisfied with position, gently press on the emblem and slowly remove the clear top liner to complete the install. Allow area to dry and then rinse with clean water 30 to 45 minutes later. Dry area. Install is complete.
